2-13
DCR-PC115/PC115E/PC120BT/PC120E
2-14.BLIND PLATE ASSEMBLY
A
A
1
Four claws
If the FP-387 flexible board is
pulled in the direction of the
arrow
A
, the claws at the four
locations will be released.
Install the flexible wire to the blind plate
so that it covers the harness (PT-128).
Remove the blind plate assembly
after opening the LCD panel.
The +P2 (0-No.) screws (M1.7
×
2.5) are MEC-processed. If the screws that are once removed,
are re-used, the screws may be loosened.
When re-assembling the mechanism, use the new +P2 (0-No.) screws (M1.7
×
2.5).
Note:
PRECAUTION DURING
FP-387 FLEXIBLE BOARD
INSTALLATION (1)
2
FP-387 flexible board
Harness (PT-128)
Blind plate
assenbly
2
Blind plate assembly
Remove it while taking care so that it must not
be caught by the flexible board and harnesses,
by pulling it in the direction of the arrow.
1
Two screws
(M1.7
×
2.5),
0-No, +p2
(Note)
2-15.PD-148B BOARD, INVERTER TRANSFORMER UNIT
PD-148B
PD-148B
A
A
B
B
8
3
LCD cabinet (R)
assembly
5
Two screws
(M1.7
×
2.5),
lock ace, p2
4
Two screws
(M1.7
×
2.5),
MI
1
Two screws
(M1.7
×
2.5),
lock ace, p2
6
Two claws
2
Two claws
7
LCD cabinet (L)
assembly
2
Panel insulating
sheet
4
Remove the
three solderings
qa
Inverter transformer unit
5
Screw
(M1.7
×
2.5),
lock ace, p2
1
Harness
(PT-128) (16P)
9
PCB clip
8
PCB clip
q;
Remove the
six solderings
7
Back light
(Cold cathode
fluorescent tube)
3
Liquid crystal
indicator module (24P)
6
Two claws
qs
PD-148B board
(Remove the FJ-035 board referring to section 2-4 before starting disassembling.)