5-34
DCR-PC115/PC115E/PC120BT/PC120E
18. AF Laser Output Adjustment
Set the AF laser output to an appropriate level.
Subject
Paper which reflection rate is 18%
(1.0m from the front of the lens)(Note1)
Measurement Point
Adjustment remote commander
Measuring Instrument
Adjustment Page
F
Adjustment Address
79 to 7B, 86 to 8B
Specified Value
Data of address: 79 is “10” to “FF”.
Data of address: 7A is “0A” to “FF”.
Data of address: 7B is “00” to “5F”.
Data of address: 87 is “0D” to “13”.
Note1:
Background paper (J-2501-130-A). Perform this adjustment in the
dark room or use a dark box.
Note2:
Any light other than the laser light should not light up the plate.
Note3:
This adjustment should be carried out upon completion of the
following adjustments.
HALL adjustment, Flange back adjustment
Note4:
Check that the data of page: 6, address: 02 is “00”. If not, to page:
6, address: 01, set data: 00, and press the PAUSE button.
Switch setting:
1)
POWER .................................................................. CAMERA
2)
FLASH ......................................................................... OPEN
(Press FLASH ( ) button and set to the forced flash mode ( ),
and press PHOTO button.)
3)
NIGHT SHOT .................................................................. OFF
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
Set the data.
2
6
01
AF
Set the data, and press PAUSE
button.
3
Check the laser light is output.
4
6
02
Check that the data is “01”.
(Note5)
5
F
79
Check that the data is “10” to “FF”.
6
F
7A
Check that the data is “0A” to “FF”.
7
F
7B
Check that the data is “00” to “5F”.
8
F
79
Check that the data is “0D” to “13”.
Note5:
The adjustment data will be automatically input to page: 7, address:
79 to 7B, 86 to 8B.
Processing after Completing Adjustments:
Order Page Address Data
Procedure
1
6
01
00
Set the data, and press PAUSE
button.
2
0
01
00
Set the data.
RadarW
RadarW
RadarW
RadarW
RadarW