31. March 2017
Manual
animeo KNX Master Control W2/W8
2011-2017, SOMFY ACTIVITES SA ALL RIGHTS RESERVED 2017/03/31
16/109
With the first connection of the animeo KNX Operating Software with the animeo KNX Master Control,
you are asked to enter the serial number (Serial Key) of the device. You will find this beside the Ether-
net connection (see picture).
The serial number (serial key) must be entered only once. Since this is saved in the animeo KNX Mas-
ter Control Operating software, with a renewed connection between software and hardware, this stand-
ard number must not be entered again.
Should the animeo KNX Operating Software not be connected with the animeo KNX Master Control, the
serial number can be also entered by hand in the software and saved.