31. March 2017
Manual
animeo KNX Master Control W2/W8
2011-2017, SOMFY ACTIVITES SA ALL RIGHTS RESERVED 2017/03/31
67/109
4.7.2.1. Year timer Bit
This function transmits “0”, “1” or “-“ as a bit telegram at the defined time. Two annual timers are avail-
able.
On some days (e.g. vacation, bank holidays) other timer commands are necessary and can be activated
using “exception” and “exception time period”. This function is not taken into consideration in the priority
function list.
The corresponding KNX object is “KNX.MC.Timer_Yearly_Bit_OUT [1]” for the “Holiday Timer 1 (Bit)”
and “KNX.MC.Timer_Yearly_Bit_OUT [2]” for the “Holiday Timer 2 (Bit)”
To set the timer function, click on “activate” and on “year timer bit 1” or “year timer bit 2”.
Parameter:
1. Time line with four possible moments (A, B, C and D) for each weekday.
A1
Time at which the Bit value set under A2 will be sent.
A2
Selection of the Bit telegram [“0“ “1“ or “-“(nothing)] which will be sent.
B1
Time at which the Bit value set under B2 will be sent.
B2
Selection of the Bit telegram [“0“, “1“ or “-“(nothing)] which will be sent.
C1
Time at which the Bit value set under C2 will be sent.
C2
Selection of the Bit telegram [“0“, “1“ or “-“(nothing)] which will be sent.
D1
Time at which the Bit value set under D2 will be sent.
D2
Selection of the Bit telegram [“0“, “1“ or “-“(nothing)] which will be sent.
2. Time () Exception defines one or more days (chapter 4.7.2.1.1).
3. Exception period defines a time period (chapter 4.7.2.1.2).
4. “OK” for taking on the setting.
5. “Cancel” for quitting without settings.