![background image](http://html.mh-extra.com/html/somfy/animeo-knx-master-control-w2/animeo-knx-master-control-w2_manual_1317463071.webp)
31. March 2017
Manual
animeo KNX Master Control W2/W8
2011-2017, SOMFY ACTIVITES SA ALL RIGHTS RESERVED 2017/03/31
71/109
4.7.2.3. Weekly byte timer
This function enables moving an end product at a set time, by means of two KNX objects, to a prede-
fined position and angle.
This function transmits two “Byte” telegrams for position and angle at a defined time. Four weekly timers
(byte) are available.
This function is not taken into consideration in the priority function list.
The corresponding KNX object for the position is
(KNX.MC.Timer_Weekly_Position_UP_DOWN_1Byte_OUT[n]) and for the angle
(KNX.MC.Timer_Weekly_Slat_Position_1Byte_OUT[n]), whereby “n” stands for the corresponding se-
lected weekly timer byte 1-4.
To set the timer function, click on “activate” and on “weekly timer byte 1” to “weekly timer byte 4”.
Parameter:
1. Timer per day with two possible points in time per weekday.
A1
Time point A activate/deactivate
A2
Time at which set position and angle under A3 and A4 will be sent.
A3
Position at which time point A1 will be moved to.
A4
Angle at which time point A1 will be moved to.
B1
Time point B activate/deactivate
B2
Time at which set position and angle under B3 and B4 will be sent
2. Angle 0°
90°, limits the turning angle of the end product from -90°/+90° to 0°/90.
3. “OK” for taking on the setting.
4. “Cancel” for quitting without settings.