![background image](http://html.mh-extra.com/html/somfy/animeo-knx-master-control-w2/animeo-knx-master-control-w2_manual_1317463095.webp)
31. March 2017
Manual
animeo KNX Master Control W2/W8
2011-2017, SOMFY ACTIVITES SA ALL RIGHTS RESERVED 2017/03/31
95/109
5.5.11. Status Bar
The “Assigned group addresses” percentage bar is shown on the right of the status bar. This indicates
the relative usage of the ETS Plug-in based on the following limits:
• 253 communication objects for the configuration of controller and modules.
• 254 group addresses for the configuration of controller and modules.
• 254 associations for the configuration of controller and modules.
Usage is stated as a percentage of the specified capacity. It is displayed as a green bar.
Example:
The system is at full capacity when there are 253 communication objects or 254 group addresses or
254 associations present.
If two communication objects with 127 group addresses each are connected, this makes 254 associa-
tions. The system is then at full capacity.
No further assignments are possible with 100 % rate of usage.
5.6. Uninstalling the ETS Plug-in
Proceed as follows to remove the software from your system. For router and controller:
1. On your PC, open the Control Panel and click “Programs”, [Uninstall a program]. The entry
“Wago-IEC61131Controller-IpRouter” is shown in the software list.
2. Right-click the required entry and choose [Uninstall] in the context menu.
For modules:
1. On your PC, open the Control Panel and click “Programs”, [Uninstall a program]. The entry
“Wago-TP1Clamp” is shown in the software list.
2. Right-click the required entry and choose [Uninstall] in the context menu.