![background image](http://html.mh-extra.com/html/somfy/animeo-knx-master-control-w2/animeo-knx-master-control-w2_manual_1317463107.webp)
31. March 2017
Manual
animeo KNX Master Control W2/W8
2011-2017, SOMFY ACTIVITES SA ALL RIGHTS RESERVED 2017/03/31
107/109
7.4. New start
Abdeckklappe
Betriebartschalter
Open cover
plate
To activate the set IP address, a reset must be carried out on the animeo KNX Master Control.
To do this, open the cover plate and press down the operation switch briefly using a screw driver. Dur-
ing pressing down, the LED’s for “I/O“ and “USR“ shine red.
Now, discontinue pressing the operating switch and the LED “I/O” begins to blink. After a short time,
the blinking stops and the LED’s, “LINK”, “MS”, “NS”, “TXD/RXD” and “I/O” light up green (see also
chapter 1.4.1.1ff).
The animeo KNX Master Control has been successfully started and has taken on the new IP address.