31. March 2017
Manual
animeo KNX Master Control W2/W8
2011-2017, SOMFY ACTIVITES SA ALL RIGHTS RESERVED 2017/03/31
101/109
148
KNX.MC.Zone_Security_High_Prio_Bit_OUT[13]
149
KNX.MC.Zone_Security_High_Prio_Bit_OUT[14]
150
KNX.MC.Zone_Security_High_Prio_Bit_OUT[15]
151
KNX.MC.Zone_Security_High_Prio_Bit_OUT[16]
152
KNX.MC.Zone_Security_Low_Prio_Bit_OUT[1] 1 bit
Per zone: when a low alarm function (e.g.
wind direction) is active, the objects send
“1”.
153
KNX.MC.Zone_Security_Low_Prio_Bit_OUT[2]
154
KNX.MC.Zone_Security_Low_Prio_Bit_OUT[3]
155
KNX.MC.Zone_Security_Low_Prio_Bit_OUT[4]
156
KNX.MC.Zone_Security_Low_Prio_Bit_OUT[5]
157
KNX.MC.Zone_Security_Low_Prio_Bit_OUT[6]
158
KNX.MC.Zone_Security_Low_Prio_Bit_OUT[7]
159
KNX.MC.Zone_Security_Low_Prio_Bit_OUT[8]
160
KNX.MC.Zone_Security_Low_Prio_Bit_OUT[9]
161
KNX.MC.Zone_Security_Low_Prio_Bit_OUT[10]
162
KNX.MC.Zone_Security_Low_Prio_Bit_OUT[11]
163
KNX.MC.Zone_Security_Low_Prio_Bit_OUT[12]
164
KNX.MC.Zone_Security_Low_Prio_Bit_OUT[13]
165
KNX.MC.Zone_Security_Low_Prio_Bit_OUT[14]
166
KNX.MC.Zone_Security_Low_Prio_Bit_OUT[15]
167
KNX.MC.Zone_Security_Low_Prio_Bit_OUT[16]
168
KNX.MC.Zone_Slat_Position_1Byte_OUT[1]
1 Byte Per zone: if the object receives a telegram
with the value between 0 and 255 (e.g.
slats angle), the object
KNX.MC.Zone_Slat_Position_1Byte_OUT
sends this value when no function with a
higher priority is active.
169
KNX.MC.Zone_Slat_Position_1Byte_OUT[2]
170
KNX.MC.Zone_Slat_Position_1Byte_OUT[3]
171
KNX.MC.Zone_Slat_Position_1Byte_OUT[4]
172
KNX.MC.Zone_Slat_Position_1Byte_OUT[5]
173
KNX.MC.Zone_Slat_Position_1Byte_OUT[6]
174
KNX.MC.Zone_Slat_Position_1Byte_OUT[7]
175
KNX.MC.Zone_Slat_Position_1Byte_OUT[8]
176
KNX.MC.Zone_Slat_Position_1Byte_OUT[9]
177
KNX.MC.Zone_Slat_Position_1Byte_OUT[10]
178
KNX.MC.Zone_Slat_Position_1Byte_OUT[11]
179
KNX.MC.Zone_Slat_Position_1Byte_OUT[12]
180
KNX.MC.Zone_Slat_Position_1Byte_OUT[13]
181
KNX.MC.Zone_Slat_Position_1Byte_OUT[14]
182
KNX.MC.Zone_Slat_Position_1Byte_OUT[15]
183
KNX.MC.Zone_Slat_Position_1Byte_OUT[16]