![background image](http://html.mh-extra.com/html/somfy/animeo-knx-master-control-w2/animeo-knx-master-control-w2_manual_1317463082.webp)
31. March 2017
Manual
animeo KNX Master Control W2/W8
2011-2017, SOMFY ACTIVITES SA ALL RIGHTS RESERVED 2017/03/31
82/109
5.2. Download Individual Address of KNX/TP1
Module
.At the topology window, click with the right mouse button on the device “TP1 Module” and select the
option “Download“. > “Download Individual Address”
The yellow LED’s “D” on the KNX terminal begin to blink. Make an electronic connection for a short
moment between the KNX programming buttons (e.g. with a wire bridge).
The red LED “B” on the KNX terminal blinks and shows that it is now in the active programming mode.
Shortly afterwards, the green LED’s “C“, “H“ and “E“ will blink. The physical address of the KNX termi-
nal has been programmed successfully when the green LED’s “E” and “H” are continuously lit.