31. March 2017
Manual
animeo KNX Master Control W2/W8
2011-2017, SOMFY ACTIVITES SA ALL RIGHTS RESERVED 2017/03/31
15/109
4.
animeo KNX Operating software
4.1. Starting up the Operating software
Start the animeo KNX Master Control Operating software.
Enter the IP address. The IP address in the delivery state is “192.168.0.2” which you can change at any
time in the software. The last assigned address is always saved and indicated.
You can change the IP address at any time in the menu under “settings” and “TCP/IP settings”.
Click on “connect” to start the communication with animeo KNX Master Control and to carry out the
parameter settings online. Click on “close” to carry out the parameter settings off-line.
4.2. Input serial number in the Operating
software