31. March 2017
Manual
animeo KNX Master Control W2/W8
2011-2017, SOMFY ACTIVITES SA ALL RIGHTS RESERVED 2017/03/31
77/109
4.8. Log
Important: System data (sensor values, parameters updates or functions) and errors are only recorded if
a PC with KNX Operating software is connected to the animeo KNX Master Control. The KNX Master
Control has no storage for system data or errors.
4.8.1. Log of the system data
In the navigation bar, click on “Log” and then on “System”.
Current values of individual sensors, parameter updates and function states (active or inactive) are
saved since the start of the project and are displayed here.
4.8.1.1. Protocolling sensors
1
2
3
4
5
6
7
Parameter:
1. Select sensors.
2. Select sensor (wind, sun or other sensors) for the protocol to be displayed.
3. Select month for the protocol to be displayed.
4. Date/time.
5. Protocolled sensor value.
6. Delete current protocol.
7. Update current protocol.