![background image](http://html.mh-extra.com/html/somfy/animeo-knx-master-control-w2/animeo-knx-master-control-w2_manual_1317463070.webp)
31. March 2017
Manual
animeo KNX Master Control W2/W8
2011-2017, SOMFY ACTIVITES SA ALL RIGHTS RESERVED 2017/03/31
70/109
4.7.2.2. Weekly bit timer
This function transmits “1”, “0” or “-“ as a bit telegram at the defined time. Four weekly timers (bit) are
available.
This function is not taken into consideration in the priority function list.
The corresponding KNX object is KNX.MC.Timer_Weekly_Bit_OUT[n], whereby “n” stands for the cor-
responding selected weekly timer Bit 1-4.
To set the timer function, click on “enable” and on “weekly bit timer 1” to “weekly bit timer 4”.
Parameter:
1. Time line with four possible moments (A, B, C and D) for each weekday
A1
Time at which the Bit value set under A2 will be sent.
A2
Selection of the Bit telegram [“0“, “1“ or “-“(nothing)] which will be sent.
B1
Time at which the Bit value set under B2 will be sent.
B2
Selection of the Bit telegram [“0“, “1“ or “-“(nothing)] which will be sent.
C1
Time at which the Bit value set under C2 will be sent.
C2
Selection of the Bit telegram [“0“, “1“ or “-“(nothing)] which will be sent.
D1
Time at which the Bit value set under D2 will be sent.
D2
Selection of the Bit telegram [“0“, “1“ or “-“(nothing)] which will be sent.
2. “OK” for taking on the setting.
3. “Cancel” for quitting without settings.