![background image](http://html.mh-extra.com/html/somfy/animeo-knx-master-control-w2/animeo-knx-master-control-w2_manual_1317463054.webp)
31. March 2017
Manual
animeo KNX Master Control W2/W8
2011-2017, SOMFY ACTIVITES SA ALL RIGHTS RESERVED 2017/03/31
54/109
Parameter:
1. Select sun function.
2. Enable/disable function.
3. Sun sensor allocation
at least one sensor must be selected. Assign sun sensor by activating the
control box of the zone. When assigning several sensors, the highest measured value of the sun
rays is used.
4. On set value (“on”)
required measured sun intensity to trigger the function.
5. On delay time
time span, during the sun threshold must exceed the set value (4) before the sun
function is activated. The average value is 2 minutes.
6. Off set value (“off”)
the required measured sun intensity which must be below the value to deacti-
vate the sun function.
7. Off delay time
time span during the sun threshold off set value (6) must be below the sun set
value before function is deactivated.
8. Enable/disable Shadow Management
see chapter 4.7.1.4
9. Select shadow zone number at the “Shadow Device”
10. Select Sun OFF Position
see chapter 4.7.1.5.
11. Select sun tracking, see the following chapter 4.7.1.4.
12. Select fixed position which is moved to with exceeding an on set value (4).
13. Position which is moved to with exceeding the on set value (4).
14. Angle, which is moved to with exceeding the on set value (4). Not available with all end products.
15. Azimuth range and elevation angle
see chapter 4.7.1.7
1
2
3
4
5
6
7
11
12
8
10
15
13
14
9