31. March 2017
Manual
animeo KNX Master Control W2/W8
2011-2017, SOMFY ACTIVITES SA ALL RIGHTS RESERVED 2017/03/31
8/109
1.4. Checking the connections
Before you start with setting the parameters, check first whether the controller is properly connected.
The LEDs in animeo KNX Master Control and in the Outside Sensor Box indicate whether the connec-
tion is correct.
Wait a few seconds until the system has started and compare the LEDs on the devices to the normal
LED state in the table. If they do not match, the connection must be checked.
1.4.1. Checking the KNX Master Control connections
Modul 1
Modul 2*
Modul 3
Modul 4
*Module 2 only available with animeo KNX Master Control W8, ref. 1860193.