![background image](http://html.mh-extra.com/html/somfy/animeo-knx-master-control-w2/animeo-knx-master-control-w2_manual_1317463062.webp)
31. March 2017
Manual
animeo KNX Master Control W2/W8
2011-2017, SOMFY ACTIVITES SA ALL RIGHTS RESERVED 2017/03/31
62/109
Ice parameter:
1. Enable/disable frost/ice function.
2. Enable/disable frost or ice function.
3. Set value
the necessary measured outside temperature which must be below the set value to
trigger the function.
4. History
Previous time span in which rain has been detected
5. On delay
time span, during rain or snow is detected, before the rain function or snow function is
activated.
6. Off delay
Time span, during rain or snow is not detected any more, before the rain function or
snow function is deactivated.
7. “Inactivate” to set back the history time by hand and to deactivate with it the ice function.
1
2
5
3
4
Rain wind direction parameters:
The function wind direction uses the response times and delay times of the rain function.
1. Enable/disable rain wind direction:
!Only available in combination of rain or rain and snow, but not available at only snow!
2. Set wind speed value
required measured wind speed to trigger the function.
3. Visualize monitored direction and range.
4. Monitored direction
wind direction for the protective angle by pulling the bar to adjust to the left or
on the right, so that the alignment of the selected façade lies in the middle of the lighted diode ring (3).
5. Monitored range
the size of the protective angle is varied by pulling the bar to the right or left.
Generally, the protective angle is 180 ° and the direction will be measured according to the orienta-
tion of the façade center.