Manual
How to programme your new Remote
V2 Phoenix – Handy -‐ TSC4
Programming of your new remote control:
There are several types of receivers
First type of receiver:
1. Open the casing of your receiver. It is located next to your motor.
2. On the receiver circuit board and press the programming button SW1. The LED light L1 on
the receiver illuminates.
3. During the following 5 seconds, press the button on your new remote control. Keep it
pressed down. The LED light on the receiver blinks once.
4. Let the button go.
5. Wait 10 seconds.
6. Your new remote control is programmed.
Summary of Contents for Phoenix
Page 3: ......
