Quick Guide: HARDI Controller HC 5500
679028-103 --- Controller software 5.14 --- Language GB
Automatic/Manual mode status
Variable application rate status
Service interval warning
Boom status without dual line
Active register (area trip)
Symbols in display’s 1
st
line
Symbol display and register number
Preset key readout (keys 6-11 below) or menu number
Optional readout
Optional readout
Press the key shortly, and it will show the preset
readout.
Hold the key down for one second, and it will
work as a short cut to a certain menu.
Navigation keys
Enter key
Clear key
Escape key
Automatic control key, which also clears % over / % under rate
Volume rate
Speed
Tank contents
Area
Volume sprayed
Remaining distance
or area
Menu 1.1 :
Menu 3.1.1 :
Menu 1.2 :
Menu 1.3.1 :
Menu 1.3.1 :
Menu 4.1.1 :
Volume rate
Speed calibration
Tank contents
Select register
Select register
Measuring distance
Additional key information
•
Escape a menu (hold to escape all menus)
•
Escape without changing value
•
Move the selection of digits or letters to the
left or to the right
•
Enter a menu
•
Confirm (accept) a value
•
Clear a value
•
Reset the active register (hold until
countdown is finished)
•
Scroll up
•
Increase a value
•
Increase volume rate in steps or select
another preset application rate
•
Scroll down
•
Decrease a value
•
Decrease volume rate in steps or select
another preset application rate
D1
D2
D3
D4
Flashing*
Spraying
Section:
off
on
off
on
Main:
off off on on
* Section closed by Auto ON/OFF or external variable rate control.
