Somati system FSTronic IRC-FI, Manual

Page: 15 / 44

www.somati-system.cz
15
5.3. Description of functions on display device
5.3.1.
Control of menu on display
press 1x
1x press showes actual version of program.
press 4s press 1x
Description of setting of optional parameters on display device. To enter the setup we have
to hold knob button and after 4 seconds display shows „Par“.
parameter 1 on value 0
press 1x
changing parameter 1
on value 1
by turning change
the parameter
After displaying „Par“ press knob button to display the individual parameters and their set
value.
By turning the knob button you can display individual parameters and after pressing
the knob button you can start to change the set values of the particular parameter – the
value flashes. The parameter value can be changed by turning the knob button and after
reaching the required value, it can be saved by pressing the knob button. If we do not want
to change the parameter value, then we have to turn by the knob until the display shows
„ESC“ and then by pressing the knob button we move forward.