Somati system FSTronic IRC-FI, Manual

Page: 3 / 44

www.somati-system.cz
3
(0 - 30 min.) in parameter “8” or until the battery is discharged to a critical level – gate
closes if the power supply is not restored and battery voltage drops below the limit 22,0 V.
Control box FSTronic IRC-FI is supplied in two basic types according to motor performance
and size of frequency inverter:
FSTronic IRC-FI STANDARD:
Description of versions FSTronic IRC-FI with batteries in control unit
series 2A 4A
Type of
FSTronic
FSTronic IRC-FI 2A STANDARD FSTronic IRC-FI 4A STANDARD
Main inner
fusing
LTNB10 – 10A LTNB10 – 10A
Type of
inverter
Yaskava
CIPR-GA50CB002EBAA-BAAASA
With integrated filter
CIPR-GA50CB004EBAA-BAAASA
With integrated filter
motors
EPO 120W EPO 250W
EPO 180W EPO 350W
FSTronic IRC-FI COMPACT:
Description of versions FSTronic IRC-FI with batteries in control unit
series 2A 4A
Type of
FSTronic
FSTronic IRC-FI 2A COMPACT FSTronic IRC-FI 4A COMPACT
Main inner
fusing
LTNB10 – 10A LTNB10 – 10A
Type of
inverter
Yaskava
CIPR-GA50CB002EBAA-BAAASA
With integrated filter
CIPR-GA50CB004EBAA-BAAASA
With integrated filter
motors
EPO 120W EPO 250W
EPO 180W EPO 350W
FSTronic IRC-FI is available in the COMPACT version, this version differs from the basic version only in
the range of standard equipment - the COMPACT version does not include a keyswitch lock on the control
panel.
1.
Installation and setting
Drive control unit is pre-set by parameter “r” for motor with which is deliveried or for the
weakest motor, control unit permanently verifies correct setting of frequency inverter
parameters. It is necessary to set parameter for motor selection Parameter “r”. To ensure
proper operation we have to install appropriate type of control box designed for particular
motor group or control box designed for a higher group of motors.