Somati system FSTronic IRC-FI, Manual

Page: 22 / 44

www.somati-system.cz
22
Type of rellay output open possition (X2:31, X2:37)
0 = at possition - closed,
from closed till possition – opened
1 = at possition - opened, from closed till possition - closed
Default = 0
Type of rellay output closed possition (X2:31, X2:38)
0 = at possition - closed,
from possition till opened – opened
1 = at possition - opened, from possition till opened – closed
Default = 0
Type of mode: Fire / Ventilation
0 = Fire mode
reaction on alarm (EPS, detectors, smoke and battery alarm) = closes the gate
1 = Ventilation
reaction on alarm (EPS, detectors, smoke) = open the gate. In
case of battery alarm - no reaction)
Default = 0
Servis end - settings of reaction in case of passing set value
in parameter service period (time or cycles)
0 = after passing value - flashing diodes
1 = after passing value - flashing totman
2 = after passing value - flashing by pressing stop for 3 seconds
prolonged period for 500 cycles.
Service period (time) Setting amount of months. Range
of values: 3-60 months
Default = 12 months (year)
Speed in setting mode „dir“
Allowed adjust speed for setting mode “dir” in percentage from set speed
by parameter “t”,
Range of values: 20-100 %
Default - 100 %
(the speed value is purposefully reduced to 30% due to the fact that it does not
slow down in the "dir" movement and the door then tends to hit the end positions,
in this reduced speed the setting of the desired position is also more sensitive
without influencing door dynamics)
Speed in reference mode
Setting of speed during referencing – searching reference point
Percentage from opening speed ste by parameter “t”,
Range of values: 20-50 %
Default = 20 %