SOLANO HORIZONTE RD75, Instruction Manual

Page: 13 / 142

HARVESTERS
RD75/90/P
MANUAL OF INSTRUCTIONS
13
NEVER HANDLE THE MACHINE IF THE ENGINE IS RUNNING AND ONE OR
MORE PROTECTION COVERS (OR GRIDS) HAVE BEEN REMOVED OR DO
NOT STAND WHERE THEY SHOULD.
§
No one can stand upon the machine under any circumstances when it is
working or being transported.
§
Before to start working and while working, the operator of the machine must
keep on paying attention to any action that could put at risk its physical
integrity and the physical
integrity of people near the machine.
§
NO ONE can stand near the machine when it is handled. Its moving parts
could catch a limb from any person close to the machine and cause
her/him serious injuries
.
§
Very important: while an operator is handling the machine (starting, working,
maintaince, etc.), any person that has nothing to do with him must keep a
sufficiently cautious
safety distance . Your machine has a big volume and
some of its movements can be abrupt and could injure anyone who does not
respect safety distance.
Safety distance: it is measured from the most salient point of the
machine up to any person or object that could get injured or damaged,
the machine being in transport or in working position.
§
Before to unplug a hydraulic pipe, make that there is no pressure left inside it.
If there remains some pressure, you could not only get stained, but also be
seriously injured if you are hit by pressurized liquid in vital parts such as skin
or eyes.
§
Pumps: never go beyond 75% of the maximum pressure during the first 50
hours of work, and change oil change every 500 hours or according to the
instructions of the manual of the pumps.
§
Check that valves work properly and are in the right position.
SAFETY MEASURES