Soehnle Professional 3035 Manual Download

Page: 89 / 124

6.7.3 Display information field

In the setting mode / program settings / counting / display information field, you can set which data are

displayed in the information field.

The following options are available:

> Counting: Toggling between the individual functions used, counting with the reference weight and

weight value in gross / net e.g. checkweighing, totalizing memory.

> Control display: Continuous display of the traffic light function.

> Total: Continuous display of the totalizing memory.

> Last item: Continuous display of the last item.

> Organizational data + database: Continuous display of organizational data memories.

> Fixed values reference weight: Continuous display of the activated reference weight memory.

> Barcode content: Continuous display of the scanned barcode.

> Code128 Weight value: display Barcode128 with the current stability weight value or counter value

> Volume: Display volume only after activating the volume measurement function.

Example Setting Display information field to fixed values reference weight:

Example control display, a traffic light display is available in the information field.

1. Below tolerance

2. within tolerance

3. Above tolerance

(setpoints reached exactly)

6.7.4 Tare function

The description and detailed instructions for the tare function can be found in chapter 6.5.

Summary of Contents for 3035





























































































































Search results

Summary of Contents for 3035

Reviews:

Related manuals for 3035

Brands by name

Popular brands

Soehnle Professional 3035, Manual

Search results

Summary of Contents for 3035

Reviews:

Related manuals for 3035

Brands by name

Popular brands