81
6.6.6 Options for displaying totals
Clearing the totalizing memory
The following functions can be assigned to the Total function key in Setting mode:
>
Display, print and delete totalsAfter
pressing the Total function key, the totals are displayed for 3 seconds, the contents of the memory
are printed and deleted at the same time. You can then start a new totalizing procedure.
>
Display of totals only
After pressing the function key Total, the user can decide whether to clear the totalizing memory.
Press the F2 key Delete total to delete the total memory, followed by the confirmation prompt Delete
total? Pressing the keys F1 to F3 YES to delete the totalizing memory, while pressing the keys F34 to
F6 NO does not delete the totalizing memory.
If you want to continue totalizing without deleting the memory, press the key F6 Back.
6.6.7 Relief factor for summation
(Parameter is not used in the picking function)
In setting mode, you can specify that the scale must be unloaded by a certain number of digits between the
time you place each item on the scale in the totalizing function. If the scale is not unloaded, the weight value
is not saved in the totalizing memory and is displayed with the error message Error 55 Place weight on scale.
This prevents, for example, double storage of an item.
6.6.8 Auto-summing / -picking
In setting mode, the Auto Sum function can be activated.
Then only the first position has to be taken over with the plus key, all further positions are automatically
taken over into the totalizing memory after unloading (only for totalizing) and placing on weight and after
standstill.
If the autototalizing function is interrupted by a cancellation, error message or change of measuring point,
autototalizing must be restarted with the Plus key.
Info: Like manual totalizing, auto totalizing can be defined as a condition that triggers printing (see chapter
on printing).
During auto-picking, a load < 5 digits is not automatically stored, but weights < 5 digits can be manually
stored in the picking memory by pressing the F6 Plus key.
6.6.9 Preferred totalizing scale
The totalizing memory can only be determined with one unit and resolution. When using several scales
(measuring points) with different settings, the parameters of the currently connected scale are used for the
totalizing process.
In setting mode, the function Preferred totalizing scale can be assigned.
The selected scale no. always determines the unit and resolution for the totalizing memory.
Summary of Contents for 3035
Page 1: ...www soehnle professional com Manual Terminal 3035 ...
Page 2: ...2 ...
Page 122: ...122 ...
Page 123: ...123 ...
