Soehnle Professional 3035 Manual Download Page 76

Page: 76 / 124

6.5.16 Settings in Setting Mode

With the parameters in the setting mode you can adapt the weighing and taring application program to your

individual requirements.

To call up the setting mode, press key F6 Setting mode in the Setting functions level and call up the program

settings with F6 Accept.

F6 Next calls up the program settings for the selected application program

Weighing and taring

Fixed tare values

Editing

fixed tare values

Selection of existing fixed values from the list

Scroll with the arrow keys F3 and F4.

Call the desired fixed value with F6 Edit.

Edit an existing fixed value from the list

Press F6 to edit the marked fixed value.

The parameter name is highlighted, call it up with F6 Edit,

Input via keyboard. Confirm the input with F6.

(Cancel without accepting the input with F5 Cancel).

Other parameters are processed in the same way.

Delete an existing fixed value

Scroll with the arrow keys F3 and F4.

Delete the marked fixed value with F2 Delete.

The resulting gap in the consecutive numbering is closed.

Save new fixed value

Press F1 New.

The memory location number is assigned by the machine. The first number in

brackets indicates the number of free memory locations, the second number

indicates the memory locations occupied by fixed values.

The parameter name is marked, call it up with F6 Edit,

Input via keyboard.

Accept the input with F6 Accept.

(Cancel without accepting the input with F5 Cancel).

Other parameters are processed in the same way.

Exit the list of fixed values

Press the F5 Back key to exit the list.

Fixed tare values

delete

Select

Do not execute or Execute

Execute deletes all fixed tare values

ORG A Delete fixed values

Select

Do not execute or Execute

Execute deletes all ORG A fixed values

ORG B Delete fixed values

Select

Do not execute or Execute

Execute deletes all ORG B fixed values

ORG C Delete fixed values

Select

Do not execute or Execute

Execute deletes all ORG C fixed values

ORG D Delete fixed values

Select

Do not execute or Execute

Execute deletes all ORG D fixed values

Summary of Contents for 3035





























































































































Search results

Summary of Contents for 3035

Reviews:

Brands by name

Popular brands

Soehnle Professional 3035, Manual

Search results

Summary of Contents for 3035

Reviews:

Brands by name

Popular brands