Soehnle Professional 3035 Manual Download

Page: 57 / 124

Use the keypad to enter the required password and press the F6 key to accept it.

The entered password is checked:

If the entry is

correct,

the EDP data record is sent with the registration confirmation, after which the terminal

is in weighing mode.

If the password is

not

entered

correctly,

the display message Error 02 Wrong password appears briefly and

then the password prompt appears again.

If you press the F5 Cancel key in the password query, the display shows the query window Login with its

query sequence.

Delete password (internal terminal password)

To call the setting mode, press F6 at key level Setting functions.

Use the arrow key F4 to select Terminal, F6 Next.

Use the arrow key F4 to mark the login function, F6 Next.

Password request, internal terminal - Enter the password and press the F6 key.

If you forget the password, you can enter CLEAR without the password to enter the login function area.

Use the arrow key F4 to highlight Delete Password, F6 Next.

The internal password is deleted.

Enter login text

The text for the Login prompt window can be defined and set individually.

For example: "Start process" or "Start weighing sequence".

To call the setting mode, press F6 at key level Setting functions.

Use the arrow key F4 to select Terminal, F6 Next.

Use the arrow key F4 to mark the login function, F6 Next.

Use the arrow key F4 Enter login text to mark the login text, F6 Continue.

Enter the login text with max. 35 digits and confirm with F6.

Without entering the login text, the factory setting "Please login" is used.

Summary of Contents for 3035





























































































































Search results

Summary of Contents for 3035

Reviews:

Related manuals for 3035

Brands by name

Popular brands

Soehnle Professional 3035, Manual

Search results

Summary of Contents for 3035

Reviews:

Related manuals for 3035

Brands by name

Popular brands