115
Summation of control items out of tolerance
The accumulation of control items that lie outside a specified tolerance range can be prevented. If the weight
value is outside the tolerance, the error message Error 27 "Out of tolerance" is displayed after pressing the F6
Plus key.
To do this, set "Within" in the setting mode under Program settings / Check / Totalisation out of tolerance.
6.8.7 Display options with the Info key
Pressing the key gives you the following choice:
>
F1 Tare Fix
Display of
the stored tare fixed values (tare fix memory).
>
F2 Contr. Fix
Display of
the stored fixed values Check (Contr. Fix memory)
>
F3 Setpoints
Display of
the active setpoint with tolerances
>
F4 Total
Display of the current totals in the totalizing memory
>
F5 Plus
Displays all the stored items in the totalizing memory (item list). The individual items can be called up
with the arrow keys (F3/F4).
>
Tare key
Display of the current tare weight in the tare memory.
After pressing the key , press the key .
6.8.8 Saving current values to the fixed memory
For the direct transfer of setpoints with tolerances into the fixed memory, first transfer the setpoint with
tolerances.
Press the F5 key to confirm. Fix at the 2nd function key level opens the contr. fix memory. The target weight
and tolerances are already stored.
The article description and the article number are added.
Gross
Summary of Contents for 3035
Page 1: ...www soehnle professional com Manual Terminal 3035 ...
Page 2: ...2 ...
Page 122: ...122 ...
Page 123: ...123 ...
