Soehnle Professional 3035 Manual Download Page 90

Page: 90 / 124

6.7.5 Counting function

The determination of the reference weight

is possible via the following function keys:

Function key F1 Ref 10Reference weight determination

from a pre-set reference sample quantity. Place 10 counting pieces on the scale, then press the F1

Ref 10 key The scale determines the reference weight and displays "10 pieces". Further parts placed

on the scale are counted continuously. The standard reference piece count "10" can be set in Setting

mode / Program settings / Counting under Standard Ref piece count. (chapter 6.7.14).

For example, if 25 is stored there, the function key is now called F1 Ref 25 and 25 pieces must be

loaded to determine the reference weight.

Function key F2 Ref VariabReference weight determination

from a freely selectable reference sample quantity. Place a certain number of reference parts on the

scale. Press the F2 Ref Variab key and use the numeric keypad to enter the number of parts (1 to

9999) on the scale. Press the F6 Accept key. The terminal determines the reference weight and

displays the number of parts on the scale. Any further parts placed on the machine are counted

consecutively.

Function key F3 Ref Weight input

of a known reference weight. Press the F3 Ref Gew key and enter the known reference weight in with

the numeric keypad. An existing reference weight is displayed and can be overwritten. By default, the

reference weight is entered in the unit "grams". If you want to enter the reference weight in

"kilograms", you can change the unit with the key . Confirm your entry with F6 Accept.

The terminal has stored the reference weight and displays the number of pieces on the machine.

New reference weight

Existing reference weights are generally overwritten by a new reference weight determination or by taking

over a fixed value from the fixed memory.

Display reference weight

Press the F3 Ref Gew key or activate the secondary display (see chapter 6.7.2)

End counting

The counting process is terminated by deleting the reference weight. The reference weight can be deleted by

pressing F3 Ref Gew and F2 Delete or simply by pressing the key . The display shows the current weight

value.

Read-only memory Reference weight (Ref Fix)

You can store 999 counting items in a power-failure-proof database.

Each memory location has the following entries:

> Three-digit serial number

> Description (alphanumeric max. 18 characters)

> Article number (alphanumeric max. 18 digits)

> Reference weight

> Target quantity

> Tolerance minus

> Tolerance plus

> Tare value

Summary of Contents for 3035





























































































































Search results

Summary of Contents for 3035

Reviews:

Brands by name

Popular brands

Soehnle Professional 3035, Manual

Search results

Summary of Contents for 3035

Reviews:

Brands by name

Popular brands