Soehnle Professional 3035, Manual

Page: 62 / 124

62
- Interpret A4 data as K-EDV command and execute it.
Format: CCC:DDDDCCC Command-CodeDDDD
... Data
Attention: If DDDD... is empty, the `:' must still be entered.
- Execute A6Data as EDP mode command
Format: e = EDP mode A - H (must be written in capital letters)
- A7Set switching output X and display alternative text
Format: z:tttt:iiii
z1 = 1 line, 2 = 2 lines
tttalternative text for dynamic function key, if
Switching point active
iiii [ ] = optional: pulse duration in ms
- Interpreting and executing A10 data as a Q-EDP command
Format: CCC:DDDD... CCC Command-CodeDDDD
... Data
Attention: If DDDD... is empty, the `:' must still be entered.
This command sends an acknowledgement via the EDP channel.
Examples :
Action A0:
An existing function key F1 with a 1-line designation is to be deleted.
<K530KF1;1L;;A0>
Note: If the designation has 2 lines, 1L is replaced by 2L.
Action A1:
F1 should be labeled "SEND DATA" and when pressed, send the text TARAB CONTAINER ON TOP to the
computer.
<K530KF1;2L; SEND DATA;A1;TARE CONTAINER PLACED ON THE MACHINE
Action A2:
F2 should be labeled "SEND DATA2" and when pressed, send the text <TARABOX UPLATED> to the
computer.
<K530KF2;2L; SEND DATA2;A2;TARE CONTAINER PLACED ON THE MACHINE
Action A3:
F3 should be labeled "PRINT" and when pressed, press print key 2 and send the corresponding data set /
print image.
<K530KF3;1L;DRUCKEN;A3;22>
Note: For the relevant printing conditions, refer to 5.18.7 Printing Conditions. The assignment of a print
image or data record (using Soehnle service program) to print key 2 is a prerequisite for output to a printer or
computer.