82
6.6.10 Assigning and deleting the sequence number
Each entry (plus, hand, cancellation) in the totalizing memory is assigned a four-digit consecutive number.
The sequence number is not reset in the factory setting.
Optionally, you can specify in setting mode to reset the sequence number:
> not active (no reset = factory setting)
> Clearing the totalizing memory
> Switching off the terminal
> function key: in the 1st level of totalizing functions, the F1 key (delete current number) is switched on
with the function.
6.6.11 Item counter
The item counter only counts the transactions that have actually been totalled. For each new operation with
plus, manual or automatic totalizing, the item counter is incremented by 1.
The item counter runs up to 999, after which the error message Error 45 appears.
The item counter is automatically set to zero each time the total is cleared.
6.6.12 Keys that trigger printing
Additional keys or functions such as Plus, Manual, Cancel and Total can be used as print-triggering keys for
the Totalizing / Picking function, e.g. for printing a document. A prerequisite is that a print image has been
stored for the respective key.
In setting mode, the totalizing key function must be set to "Display, print
and delete" or delete the total with the F2 key.
6.6.13 Display of current totals
Within a summation, you can display the total values reached by pressing
and then press the key F4 Sum.
You can delete the totals with the F2 key and the consecutive number (if only "Display" is activated in setting
mode under the function "Total key") or return to the totalizing mode with the F6 Back key.
Display Current totals view:
Summary of Contents for 3035
Page 1: ...www soehnle professional com Manual Terminal 3035 ...
Page 2: ...2 ...
Page 122: ...122 ...
Page 123: ...123 ...
