96
Display individual items
Within a totalizing function, you can call up the individual items from the totalizing memory by pressing
the - and the plus key F5 in
succession. The item list starts with the most recent entry.
Cycle through the list with the arrow keys F3 (older entries) and F4 (newer entries).
The last 50 entries can be called up.
Press the F5 Back key to exit the display of the individual items and return to the previous display.
Totalizing outside tolerance
The accumulation of quantities that are outside a specified tolerance range can be prevented. If the quantity
is outside the tolerance, the error message "Out of tolerance" is displayed after pressing the Plus key.
To do this, you must switch off in setting mode under "Totalizing out of tolerance". You define the target
quantity and the permitted tolerance in the piece control mode.
Further information under piece control
Summation of different counting parts
The totalizing of different counting parts can be prevented by enabling the determination of a new reference
weight only after clearing the totalizing memory by pressing "Clear total" in the setting mode.
6.7.7 Reference Statistics
Determination of the weight tolerance of counting parts.
The weighbridge with the finest resolution is used.
The unit weight must be greater than the smallest digit of the connected weighbridge.
Unload the scale. Press the key F3 Ref Stat.
The scale goes to weight display zero and asks "1. place sample on the scale".
Place the sample on the scale, the scale takes over, goes to weight value zero and requests the second
sample.
The previous sample remains on the scale.
Repeat the procedure until the desired number of samples is reached.
Key F6 Accept leads to the evaluation and display of the statistics.
Summary of Contents for 3035
Page 1: ...www soehnle professional com Manual Terminal 3035 ...
Page 2: ...2 ...
Page 122: ...122 ...
Page 123: ...123 ...
