Soehnle Professional 3035 Page 12 Manual Download

Page: 12 / 124

2.5 Switching on / off

Switch on:

Press the ON/OFF key.

When switching on, the logo , terminal type 3035, filter type and the recognized measuring points are

briefly displayed during the start routine.

The scale is set to zero after the power-on process.

When the machine is switched on, the last application program used is switched back on.

Zero setting limits:

Calibratable: Zero setting range 20% of the weighing range,

Default value is -5% to +15% of the weighing range. Optional: extended range on request.

Non-verifiable: the switch-on zero setting range can be -99% to +99% of the weighing range.

If you switch on outside the switch-on zero setting range, the scale displays an error message.

Afterwards the terminal goes directly into the weighing mode if not verifiable, whereas if verifiable, it is

possible to jump to the weighing mode by pressing the zero key. The current weight value with the

previously stored zero point is then displayed. If the cause for under- or overload is removed, the scale goes

to zero without having to be switched on again and is ready for operation.

Backlight and color

Can be adjusted in the setting mode (terminal/display).

The default setting is 80% for the backlight and white for the background color.

Procedure on power failure

When power is restored, the scale returns to the previously exited state.

Switch off

Press the ON/OFF key .

If the connected measuring point is loaded, or if you have called up a menu, the scale only switches off after

pressing the ON/OFF key for 3 seconds.

It is not possible to switch off the scale while it is waiting for an input in the editing area of the setting mode.

To switch off the scale you must leave the editing area.

OFF display

In the setting mode Service (including password request) / General/OFF display, you can set whether the

word "OFF" appears on the display when the scale is switched off (medical directive).

Default setting is "with OFF display".

Summary of Contents for 3035





























































































































Search results

Summary of Contents for 3035

Reviews:

Related manuals for 3035

Brands by name

Popular brands

Soehnle Professional 3035, Manual

Search results

Summary of Contents for 3035

Reviews:

Related manuals for 3035

Brands by name

Popular brands