Soehnle Professional 3035 Page 51 Manual Download

Page: 51 / 124

5.12 Alphanumeric input

The combined keypad can be used to make alphanumeric entries. As an option, the USB interface and the

USB adapter cable for PC keyboard 2550.03.027 can be used to simplify input via a USB PC keyboard.

Types of input fields

Display fields without write capability

Display/write fields with possibility of numerical input

Display/write fields with possibility of alphanumeric input

Activating the input fields

Depending on the situation by means of function keys or direct numerical input. The Input view is displayed.

Existing values are displayed.

The name of the input field is displayed in the toolbar. A dimension sign is displayed if the input refers to a

dimension.

Input procedure

Numerical fields

You can enter the numbers 0 to 9 directly using the numeric keypad.

The registration is right-aligned. A cursor flashes under the last digit entered.

The C key deletes the digit marked with the cursor, the CL key or the Delete function key deletes the entire

entry. The Cancel key terminates the input without saving new input values; existing values are retained.

Press the Apply key to accept the entered value and switch the application program back on.

The specification of whether a full stop, comma or no decimal separation is set in the setting mode

Display/Decimal Separation. The input field can only contain up to the specified number of characters; no

further entries are displayed and are not accepted.

Alphanumeric fields

You can enter the numbers 0 to 9 directly using the numeric keypad.

The entry is left-aligned. The numeric keys are also assigned letters in upper case and special characters. In

addition, the special character keys (,. /) and (+-) are available.

If you press a numeric key within one second of pressing it again, the characters assigned to the key are

activated in a rolling sequence. If no further key is pressed within one second, the character you called is

accepted and the cursor moves one position further.

Numbers can be entered directly one after the other without waiting time as long as a number is not called

several times in succession. A cursor blinks under the position to be entered.

Use the arrow keys to move the cursor.

The C key deletes the last character to the left of the cursor or the character under which the cursor is

flashing, the CL key deletes the entire entry.

The Cancel key terminates the input without accepting new input values; existing values are retained. Press

the Apply key to accept the entered value and switch the application program back on. You can only enter up

to the specified number of characters in the input field; further entries overwrite the last character. All

alphanumeric entries can also be made with the optional external PC keyboard.

Summary of Contents for 3035





























































































































Search results

Summary of Contents for 3035

Reviews:

Related manuals for 3035

Brands by name

Popular brands

Soehnle Professional 3035, Manual

Search results

Summary of Contents for 3035

Reviews:

Related manuals for 3035

Brands by name

Popular brands