Soehnle Professional 3035 Page 85 Manual Download

Page: 85 / 124

Press the F5 key to confirm. Fix, the value can be stored directly in the fixed memory.

The input window for the fixed tare values appears.

To enter the designation of the fixed tare value, press the F6 key Edit.

Enter the designation with the keypad and confirm the entry by pressing the F6 key.

6.6.17 Organizational data (identifier)

Detailed information on the organizational data can be found in chapter 5.11.

6.6.18 Settings in setting mode

With the parameters in Setting mode, you can adapt the Totalizing and Picking application program to your

individual requirements.

To call up the setting mode, press the F6 Setting mode key on the Setting functions level and then press F6

Accept to call up program settings.

F6 Next calls up the program settings for the selected application program

Totalizing and picking

Buzz or come.

Select

Totalizing or Picking for the following settings.

Totalizing

means that the individual positions are taken from the scale after being

transferred to the totalizing memory.

Picking

means that the individual items remain on the scale after being transferred

to the totalizing memory and the next items are placed on the scale. Factory

setting: Totalisation

Preferred totalizing scale

Selection

none, scale xx, scale xx etc.

Which scale no. is used for the resolution of the totalizing memory.

If none, the currently connected scale is always used for the first totalisation.

Factory setting: none

Summary of Contents for 3035





























































































































Search results

Summary of Contents for 3035

Reviews:

Related manuals for 3035

Brands by name

Popular brands

Soehnle Professional 3035, Manual

Search results

Summary of Contents for 3035

Reviews:

Related manuals for 3035

Brands by name

Popular brands