Soehnle Professional 3035 Page 110 Manual Download

Page: 110 / 124

110

Edit an existing fixed value from the list

Edit the selected fixed value with F6 Edit.

Parameter name is highlighted, call up with F6 Edit, input via keyboard.

Accept the input with F6 (Cancel without accepting the input with F5 Cancel).

Other parameters are edited in the same way. Only the same number of decimal places can be used for the

tolerance fields minus and plus.

Delete an existing fixed value

Scroll with the arrow keys F3 and F4 or call via the article number or the consecutive number.

Delete the called fixed value with F2 Delete. Answer the security query with YES.

The resulting gap in the consecutive numbering is closed.

Save new fixed value

Press F1 New.

The memory location number is assigned by the terminal. The first number in brackets indicates the number of

free memory locations, the second number indicates the occupied memory locations.

Parameter Name is highlighted, call up with F6 Edit, input via the keyboard.

Accept the input with F6 (cancel without accepting the input with F5 Cancel).

Other parameters are processed in the same way. Only the same number of decimal places can be used for

the tolerance fields minus and plus.

Exit the list of fixed values

Press the F5 Back key to exit the list.

b) Call up the list of fixed values for control weights for checking:

In level 1 Control functions, press the F2 Contr. fix key.

The display shows the last fixed value called up

Selection within the list

> Scroll with the arrow keys F3 or F4 until the desired memory location is reached,

accept the desired fixed value with F6 Accept

> Direct access via article number or memory location numberEnter

the article or memory location number with the numeric keypad.

(Determine whether the article number or memory location number is called up in setting mode, enter

the article number as search criterion left-justified, enter the memory location number as search

criterion right-justified) Accept the desired fixed value with F6 Accept

When the fixed value is called up, setpoints and tolerances for checking are also accepted, if they have been

saved.

Press the CL key to delete the read-only memory from the main memory.

Delete all stored reference weights using the "Delete reference weights" function in setting mode

Note

If the fixed memory recall via barcode function is activated and a fixed value not contained in the fixed

memory is recalled, the error message "Error 83 - Fixed value not available" is displayed. You are returned to

the weighing mode and the selected function is deleted.

Summary of Contents for 3035





























































































































Search results

Summary of Contents for 3035

Reviews:

Related manuals for 3035

Brands by name

Popular brands

Soehnle Professional 3035, Manual

Search results

Summary of Contents for 3035

Reviews:

Related manuals for 3035

Brands by name

Popular brands