Soehnle Professional 3035 Manual Download Page 17

Page: 17 / 124

4.1 Starting the setting mode

Switch on the terminal.

After the switch-on routine, the terminal automatically starts the last activated application program. To call

up the setting mode, switch to the setting functions level with the function change key.

Function keys:

Level Setting functions

Gross

x 10

Secondary

display

Prog

ram

Setup

mode

F 1

F 2

F 3

F 4

F 5

F 6

Press the F6 Setting mode key.

You are now in the selection menu Setting mode.

Navigation in setting mode:

The function keys F1 to F6 are available to control the functions.

These take on different functions depending on the program and situation.

The respective function is shown on the display in the function bar.

Meaning of the function keys:

↑

Move the marker up in the list

↓

Move the marker down in the list

End

Exiting the setting mode

Continue

Call up the marked menu item

Back

Return to higher level

AbortReturn without accepting a change

Delete

Deleting a position with return

ApplyAcceptance of an entry or change

→

Cursor to the right

←

Cursor to the left

Summary of Contents for 3035





























































































































Search results

Summary of Contents for 3035

Reviews:

Brands by name

Popular brands

Soehnle Professional 3035, Manual

Search results

Summary of Contents for 3035

Reviews:

Brands by name

Popular brands