SMC Networks HRS090-A, Operation Manual

Page: 70 / 196

HRX-OM-S004
Chapter 5 Display and setting of various functions
5.2
Function HRS Series
5-4
5.2.2 List of parameters
“Table 5.2-1 List of parameters (1/3)” to “
Table 5.2-3 List of parameter (3/3)
”
show the parameters of the thermo-chiller.
Table 5.2-1 List of parameters (1/3)
Display Content Default setting ∗ 1
Reference
page
Category
Circulating fluid temperature(TEMP PV)
Temperature
Circulating fluid set temperature(TEMP SV) 20
o
C (68
o
F)
Circulating fluid discharge pressure
Unused
5.3
Main display
X X
Alarm No. 5.4
Alarm
display
menu
Circulating fluid discharge temperature
Circulating fluid inlet heat
exchanger temperature
Temperature of the compressor inlet.
Circulating fluid discharge pressure
Pressure of higher pressure refrigerant circuit
Pressure of lower pressure refrigerant circuit
Unused
Accumulated operation time of the pump
Accumulated operation time of the fan
Accumulated operation time of the
compressor
Accumulated operation time
Accumulated operation time of the
dust-proof filter
Circulating fluid flow rate
5.5
Check
monitor
menu
Key-lock OFF 5.6
Run timer 0.0H
Stop timer 0.0H
5.7
READY mode OFF
READY band width ---- (0
o
C (0
o
F) ∗ 2
READY time ---- (10) ∗ 2
5.8
Offset mode OFF
Offset temperature ---- (0
o
C (0
o
F)
∗
3
5.9
Recover from power failure OFF 5.10
Anti-freezing function OFF 5.11
Key click sound ON 5.12
Temperature unit C 5.13
Pressure unit MPa 5.14
Data reset NO 5.15
Pump accumulated operating time reset
NO
Fan accumulated operating time reset NO
Compressor accumulated operating time
reset
NO
5.16
Unused
----
Unused
----
Unused ----
Unused
----
Unused ----
Unused
----
Setting
menu
*1: Initial values are shown in Fahrenheit ( □□
o
F) when the temperature unit is set to F for SE12.
∗2 : Default when SE04 is set ON.
∗
3: Default when SE07 is set to MD1, 2 or 3.