SMC Networks HRS090-A, Operation Manual

Page: 63 / 196

HRX-OM-S004
Chapter 4 Starting the Product
HRS Series
4.4
Operation Start and Stop
4-7
4.4 Operation Start and Stop
4.4.1 Starting the product
Before starting, check the items specified in “4.1 Before Starting”
If any alarm light remains ON, refer to Chapter 6 Alarm Notification and
Troubleshooting”
1.
Press the [RUN/STOP] key on the operation panel.
he [RUN] LED (green) turns ON and the product starts running. The circulating fluid
discharge temperature (PV) is controlled to the set temperature (SV).
Fig. 4-8 Starting the product
2.
Be sure to confirm that the circulating fluid level satisfies the minimum required flow rate
specified for each model with the check monitor menu.
ON
Press
When any alarm is generated, refer to “Chapter 6 Alarm Notification and
Troubleshooting’’.
Allow at least five minutes before restarting the product.