background image

HRX-OM-S004 

Chapter 1   Safety Instructions 

 

HRS Series 

1.6

Emergency Measures 

 
 

1-5

1.6  Emergency Measures 

When emergency conditions such as natural disaster, fire, earthquake and 
injury occur, shut off the breaker of the user’s power supply that supplies 
power to the product.   

 

 

 

1.7 Waste disposal 

1.7.1 

Disposal of refrigerant and compressor oil 

The product uses hydro fluorocarbon type refrigerant (HFC) and 
compressor oil. Comply with the laws and regulations in each country for the 
disposal of refrigerant and compressor oil. The type and quantity of 
refrigerant is described on the 1.4 Product Label. 

If these fluids need to be recovered, read and understand the instructions 
below carefully. If there is any unclear point, contact an SMC's sales 
distributor. 

 

 

 
 
 
 
 
 
 
 
 
 
 
 

1.7.2 

Disposal of product 

The disposal of the product must be handled by a specialized industrial 
waste disposal agency in accordance with local laws and regulations. 

 

Only maintenance personnel or qualified people are allowed to open 
the cover panels of the product. 
Do not mix the compressor oil with domestic waste for disposal. Also, 
the disposal of the waste must only be conducted by specific facilities 
that are permitted for that purpose. 

Even when the power supply switch is turned off, some of the internal 
circuits are still energized, unless the user’s power supply is shut off. 
Be sure to shut off the breaker of the user’s power supply. 

Comply with the laws and regulations in each country for the disposal 
of refrigerant and compressor oil.   
The release of refrigerant in to the atmosphere is banned by law. 
Recover it with specific equipment and dispose of it correctly. 
Only people who have sufficient knowledge and experience about the 
product and its accessories are allowed to recover the refrigerant and 
compressor oil.   

Summary of Contents for HRS090-A





































































































































































































Reviews: