SMC Networks HRS090-A, Operation Manual

Page: 141 / 196

HRX-OM-S004
Chapter 5 Display and setting of various functions
HRS Series
5.21
Communication function
5-75
22.
Perform setting for parity check (simple communication protocol) with [ ▲ ] key or [ ▼ ]
key, and press [SEL] key to enter.
Table 5.21-12 Parity check setting
Set value Explanation
Initial value
(Default setting)
Setting/checking is possible only when the
serial protocol setting is simple
communication protocol.
No parity check
✓
Parity check with odd number
Parity check with even number
Setting/Checking: Stop bit (simple communication protocol)
23.
Press the [SEL] key once.
Setting screen of stop bit (simple communication protocol) is displayed on the digital
display.
PV
SV
24.
Set stop bit (simple communication protocol) with [ ▲ ] key or [ ▼ ] key, and press [SEL]
key to enter.
Table 5.21-13 Stop bit setting
Set value Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
serial protocol setting is simple
communication protocol.
1 bit
2 bit
✓
Setting/Checking: Response delay time (simple communication protocol)
25.
Press the [SEL] key once.
Setting screen of response delay time (simple communication protocol) is displayed on
the digital display.
PV
SV