SMC Networks HRS090-A, Operation Manual

Page: 90 / 196

HRX-OM-S004
Chapter 5 Display and setting of various functions
5.9
Offset function HRS Series
5-24
■ When only the "displayed circulating fluid temperature" needs to be the same as the
circulating temperature supplied to the user's equipment:
Use "MODE 2" of the offset function, and set the offset temperature to "-1.0"
o
C.
1. The thermo-chiller controls the circulating fluid temperature aiming at 30
o
C (set
circulating fluid temperature).
2. 29
o
C (the actual fluid temperature of 30
o
C minus the offset temperature of 1
o
C) will
be displayed as the circulating fluid temperature.
■ When both the "set circulating fluid temperature" and the "displayed circulating fluid
temperature" need to be the same as the circulating temperature supplied to the user's
equipment:
Use "MODE 3" of the offset function, and set the offset temperature to "1.0"
o
C.
1. The thermo-chiller controls the circulating fluid temperature aiming at 31
o
C (set
circulating fluid temperature plus offset temperature).
2. The displayed circulating fluid temperature is the fluid temperature discharged from the
thermo-chiller (31
o
C minus the offset temperature).
Circulating fluid display
temperature
29
℃
Circulating fluid set
temperature
30
℃
Offset temperature
-1
℃
This product User’s equipment
Serial communication
Fluid discharge
temperature: 30
℃
29℃
Circulating fluid
temperature: 29
℃
Heat
dissipation
1
℃
Circulating fluid display
temperature
30
℃
Circulating fluid set
temperature
30
℃
Offset temperature
1
℃
This product User’s equipment
Serial communication
Fluid discharge
temperature: 31
℃
30℃
Circulating fluid
temperature: 30
℃
Heat
dissipation
1
℃