SMC Networks HRS090-A, Operation Manual

Page: 155 / 196

HRX-OM-S004
Chapter 6 Alarm Notification and Troubleshooting
HRS Series
6.2
Alarm buzzer stop
6-3
6.2 Alarm buzzer stop
An alarm buzzer sounds to notify when any alarms are generated. How to
stop the alarm buzzer is explained below.
z
Confirm that the alarm display is shown. The alarm buzzer can be stopped
only on this screen.
z
Press the [ ▼ ] and [ ▲ ] buttons simultaneously, and the alarm buzzer
stops.
[Tips]
・ Alarm buzzers can be set not to make sound. Refer to “5.1520 Alarm Buzzer
Sound Setting”. It is not necessary to follow the buzzer stop instructions
when the alarm buzzer sound is set to OFF.
・
If this procedure is performed when the cause of the alarm has been
eliminated before stopping the alarm buzzer, the alarm will be reset at the
same time.
∗
[ ] light turns ON only when “AL01 Low level in tank” alarm is being generated.
Flash
ON
Press together
Alarm buzzer stop