SMC Networks HRS090-A, Operation Manual

Page: 149 / 196

HRX-OM-S004
Chapter 5 Display and setting of various functions
HRS Series
5.21
Communication function
5-83
52.
Select a function with [ ▲ ] key or [ ▼ ] key, and press [SEL] key to enter.
Table 5.21-27 Setting for the contact output signal 2
Set value Explanation
Initial value
(Default setting)
No signal output
Operation status signal output
Remote status signal output
✓
Ready completion (TEMP READY) signal output
Operation stop alarm signal output
Operation continuation alarm signal output
Alarm status signal output
Selected alarm status signal output
Operation start timer setting status signal output
Operation stop timer setting status signal output
Operation restoration from power failure setting status
signal output
Anti-freezing setting status signal output
Pass through signal output of the contact input
signal 1
Pass through signal output of the contact input
signal 2
Warming up function setting status signal output
Anti-snow coverage function setting status output
Setting/Checking: Contact output signal 2 operation
53.
Press the [SEL] key once.
Setting screen of the contact output signal 2 operation is displayed on the digital display.
PV
SV
54.
Set the operation type of the contact output signal 2 with [ ▲ ] key or [ ▼ ] key, and press
[SEL] key to enter.
Table 5.21-28 Operation type setting for the contact output signal 2
Set value Explanation
Initial value
(Default setting)
N.O. type
✓
N.C. type