Ski-Doo Formula S 1998, Shop Manual

Page: 291 / 338

Section 08 STEERING/FRONT SUSPENSION
Subsection 02 (STEERING SYSTEM)
08-02-10
LUBRICATION
The following symbols will be used to show what
type of lubricant should be used at the suitable
locations.
1. Synthetic grease (P/N 413 7115 00)
2. BOMBARDIER LUBE (P/N 293 6000 16)
Grease Fitting and Ski Leg
Use synthetic grease only (P/N 413 7115 00).
Tundra II LT
Lubricate front suspension posts and pivot arm at
grease fittings. Pump five strokes of grease gun
on each post.
NOTE: There are 3 grease fittings.
Oil ball joints and steering column bushings.
NOTE: There are 8 lubrication points.
S-Series
Lubricate:
– Steering column.
– Ski legs, ski pivots and idler arm.
– Stabilizer sliders with grease, and oil their ball
joints if so equipped.
– Pivot arm at grease fitting no. 26 (some models
only).
;
WARNING
Do not lubricate throttle and/or brake cable,
housing and spring coupler bolts.
A00G01A
2
1
1
A05G05B