Ski-Doo Formula S 1998, Shop Manual

Page: 154 / 338

Section 05 TRANSMISSION
Subsection 03 (DRIVE PULLEY)
05-03-5
1. Curved end
2. Spring cover slot
A. 2 to 3 mm (1/16 to 1/8 in)
All Models
Tighten nut no. 8 to 128 N•m (95 lbf•ft).
INSTALLATION
Torque screw to 90 to 100 N•m (66 to 74 lbf•ft).
Install drive belt and belt guard.
Raise and block the rear of the vehicle and sup-
port it with a mechanical stand.
Accelerate the vehicle at low speed (maximum 30
km/h (20 MPH)) and apply the brake, repeat 5
times.
Recheck the torque of 90 to 100 N•m (66 to 74
lbf•ft).
;
WARNING
Ensure that the track is free of particles
which could be thrown out while track is ro-
tating. Keep hands, tools, feet and clothing
clear of track. Ensure nobody is standing
near the vehicle.
;
WARNING
After 10 hours of operation the transmission
system of the vehicle must be inspected to
ensure the retaining screw is properly
torqued.
A05D0NA
2
A
1