Ski-Doo Formula S 1998, Shop Manual

Page: 280 / 338

Section 07 REAR SUSPENSION
Subsection 05 (TRACK)
07-05-4
TYPICAL
1. Retighten (except S-Series)
2. Retighten
Restart engine, rotate track slowly and recheck
alignment.
TRACK CLEAT
Removal
– Raise rear of vehicle off the ground and lift
snow guard then rotate track to expose a cleat
to be replaced.
– Using track cleat remover (P/N 529 0082 00) for
Tundra II LT. Use (P/N 529 0087 00) for all other
models.
Installation
NOTE: Keep the same pitch between guide
cleats.
– Place new cleat in position and using small
track cleat installer (P/N 529 0085 00) for Tundra
II LT or cleat installer (P/N 529 0288 00) for S-
Series, bend cleat then push tabs into rubber.
TYPICAL
1. First step
2. Second step (to push tabs into rubber)
1
2
A05F0EB
A01B4UA
1
2