Ski-Doo Formula S 1998, Shop Manual

Page: 278 / 338

Section 07 REAR SUSPENSION
Subsection 05 (TRACK)
07-05-2
1. Example 45 mm
2. Extrusion
Insert pre-setted gauge between slider shoe and
track. Allow gauge to settle by forcing track up
and down. Track tension is as specified when
edge of gauge reaches line.
TYPICAL
1. Line
NOTE: Lightly oil track tension gauge center pin
to avoid sticking.
Tundra II LT
35 to 40 mm (1-3/8 to 1-9/16 in) when exerting a
downward pull of 7.3 kg (16 lb).
A. 35 to 40 mm (1-3/8 to 1-9/16 in)
S-Series
35 to 40 mm (1-3/8 to 1-9/16 in) when exerting a
downward pull of 7.3 kg (16 lb).
TYPICAL
1. 35 to 40 mm (1-3/8 to 1-9/16 in) with 7.3 kg (16 lb)
40
45
50
A01B4JA
1
2
A01B4KA
1
A05A01A
A
1
A25F0CA