Ski-Doo Formula S 1998, Shop Manual

Page: 177 / 338

Section 05 TRANSMISSION
Subsection 05 (PULLEY DISTANCE AND ALIGNMENT)
05-05-3
PULLEY ALIGNMENT AND DISTANCE SPECIFICATIONS CHART
➀
Alignment templates have been made according to pulley alignment nominal values. However, they
do not take into account allowed tolerances for alignment specifications. They are used as GO/NO
GO gauges for quick alignment and pulley distance check and as templates to reach alignment nom-
inal values.
Tundra II LT
1. Driven pulley movement
2. Engine movement
Pulley Distance Adjustment Method
Slacken the 4 chaincase retaining bolts, unlock
and raise pulley support.
Move chaincase to obtain specific adjustment and
adjust driven pulley support length accordingly
(light contact).
MODEL
PULLEY
DISTANCE
OFFSET
ALIGNMENT
TEMPLATE
➀
P/N
Z X Y-X
+
0,
−
1 mm
(
+
0,
−
.040 in)
±
0.50 mm
(.020 in)
Tundra II LT
37.0
(1.460)
36.0
(1.420)
0 to 1.5 mm
(0 to .060 in)
529 0269 00
Bombardier Lite
Equipped S-Series 25.0
(.984)
33.4
(1.315)
0.5 to 1.5 mm
(.020 to .060 in)
529 0300 00
TRA Equipped
S-Series 16.5
(.650)
35.0
(1.380)
1.0 to 2.0 mm
(.040 to .080 in)
529 0267 00
Y
X
A05D0CA
1
2
Z
-
CAUTION
The rear suspension must be mounted on
the vehicle and track tension and alignment
must be done to provide the right frame
width.