Ski-Doo Formula S 1998, Shop Manual

Page: 178 / 338

Section 05 TRANSMISSION
Subsection 05 (PULLEY DISTANCE AND ALIGNMENT)
05-05-4
Step : Push and hold
Step : Raise support
Pulley Alignment Method
Engine Movement
Loosen the support retaining bolts and install en-
gine support positioner (P/N 529 0245 00) to keep
from altering distance between both supports.
TYPICAL
Move the engine to obtain specified pulley align-
ment, torque engine support bolts to 55 N•m (41
lbf•ft) and remove engine support positioner.
Driven Pulley Movement
Shims can be mounted between chaincase and
frame. Use shim (P/N 504 0398 00), 0.53 mm
(.021 in) thick.
S-Series
TYPICAL
1. Engine movement
2. Contact
NOTE: Prior to performing pulley adjustment,
loosen torque rod nut to allow engine movement.
Engine supports have tendency to stick to frame,
work engine loose prior to aligning.
1. Loosen
A05D0PA
2
1
1
2
A03B02A
529 0245 00
1
A15D02A
Y
X
Z
2
A06D07B
1