Ski-Doo Formula S 1998, Shop Manual

Page: 188 / 338

Section 05 TRANSMISSION
Subsection 06 (BRAKE)
05-06-9
TYPICAL
1. Open bleeder
2. Clear hose to catch used brake fluid
Brake Light
Models with Mechanical Brake
Except Tundra II LT
Brake light should light up before brake pads
touch brake disc. To adjust, unscrew nut
no. 10
until brake light goes on.
Check brake adjustment as described above.
NOTE: If brake light adjustment is unattainable
while respecting brake adjustment, ratchet wheel
may be too far out. If so, tighten ratchet wheel.
Tundra II LT
Brake light should light up before brake pads
touch brake disc. To adjust, unlock nut
no. 21 and
turn brake switch no. 22 accordingly. Lock in po-
sition by tightening nut no. 21 .
Models with Hydraulic Brake
There is no adjustment on these models. Check
that switch is securely installed.
;
WARNING
At least one full thread must exceed the elas-
tic stop nut.
A06D0JA
2
1