Operate
6.2 Parameter description
SITRANS VP300 with or without HART
90
Operating Instructions, 03/2011, A5E01258666-03
"2.4.3.6 Ti Down"
Conditions:
Positioner is initialized.
Setting range:
0.001 ... 100.000
Purpose:
Integration time constant in closing direction. A value change will
become effective immediately. Canceling is not possible.
6.2.2.5
"2.5 Display"
Use the following menus to adjust contrast and orientation of the display to your
requirements.
"2.5.1 Contrast"
Requirements:
None
Factory setting:
3
Setting range:
0 ... 6
Purpose:
To adjust the legibility of the display.
Description:
Use this menu to set the contrast of the display.
If operating at temperatures below -20 °C the positioner's liquid crystal
display becomes sluggish and the display repeat rate is reduced
considerably.
"2.5.2 Orientation"
Factory setting:
Standard
Setting options:
Standard
Upside down
Purpose:
Adjusting the display to the mounting position.
Description:
If you select the setting "Upside down", the display rotates the
displayed values by 180°. The function of the buttons is also
rotated.